{"title":"UPPAbaby Vista","description":"\u003cp\u003eEverything we make that fits an \u003cstrong\u003eUPPAbaby Vista\u003c\/strong\u003e. The Vista is the most common frame in this category, and the one people most often arrive at holding gear from a different brand.\u003c\/p\u003e\n\u003ch2\u003eCheck your generation before you order\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModel year matters here more than on most frames.\u003c\/strong\u003e UPPAbaby revised the Vista mount without renaming the stroller: \u003cstrong\u003e2015 and later share an interface, 2014 and earlier do not.\u003c\/strong\u003e Our listings name the exact generations each part has been fitted on — V2, V3 and the 2015–2019 range — rather than saying \"fits Vista\" and leaving you to find out.\u003c\/p\u003e\n\u003cp\u003eIf you are not sure which you have, the \u003ca href=\"\/pages\/fit-guide\"\u003efit guide\u003c\/a\u003e shows you how to tell from the frame itself.\u003c\/p\u003e\n\u003ch2\u003eWhat we are building for it\u003c\/h2\u003e\n\u003cp\u003eThe Vista line is on the bench: carrying a \u003cstrong\u003eCYBEX carry cot, seat unit and shopping basket\u003c\/strong\u003e on a Vista frame, plus a \u003cstrong\u003eYETI Hopper Flip cooler mount\u003c\/strong\u003e and a balance bike and scooter holder. We publish a part when it has been on the actual frame, not before, so this list grows slowly on purpose.\u003c\/p\u003e\n\u003cp\u003eWant one of these sooner? Say so through the \u003ca href=\"\/#sh-fit-finder\"\u003eFit Finder\u003c\/a\u003e. Requests decide the order we build in, and the people who ask first hear first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne thing that applies to every part here:\u003c\/strong\u003e it must come off before the stroller is folded. See \u003ca href=\"\/pages\/installation-and-safety\"\u003einstallation and safety\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStroller House is an independent aftermarket brand. We are not affiliated with, sponsored by, authorized by or endorsed by UPPAbaby. Brand and model names identify fitment only.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"yeti-hopper-flip-cooler-mount-uppababy-vista","title":"YETI Hopper Flip Cooler Mount for UPPAbaby Vista (Original Lower Adapters)","description":"\u003cp\u003eLove your YETI Hopper Flip, but tired of it eating up half the storage basket every time you leave the house?\u003c\/p\u003e\n\u003cp\u003eThat is exactly what this mount is designed to fix.\u003c\/p\u003e\n\u003ch2\u003eRead this first: check your lower adapters\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis mount fits the ORIGINAL UPPAbaby Vista lower adapters — the ones sold before UPPAbaby redesigned them in 2024.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt does not fit the current lower adapters\u003c\/strong\u003e (UPPAbaby part \u003cstrong\u003e0901-VLA-NA\u003c\/strong\u003e) — the ones that come in the box with a \u003cstrong\u003eRumbleSeat V2+ or RumbleSeat V3\u003c\/strong\u003e. Those have a different receiver, and this mount will not seat in them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe model year of your stroller does not tell you which ones you have.\u003c\/strong\u003e Both sets fit the same Vista frames. It is the adapters that matter. There is a short test below.\u003c\/p\u003e\n\u003cp\u003eA version for the 2024 adapters is being built. We have the part on order and will not list it until it has been test-fitted on the real thing. \u003ca href=\"\/#sh-fit-finder\"\u003eTell the Fit Finder\u003c\/a\u003e you want it and we will email you the day it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWe originally listed this mount as fitting every Vista from 2015 onward. That was wrong, and a customer found it before we did. This listing now says exactly which adapters it fits.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to tell which lower adapters you have\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe quickest test: does your RumbleSeat clip into the same lower adapters as your bassinet?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eYes\u003c\/strong\u003e — one set of lower adapters takes the bassinet, the car seat \u003cem\u003eand\u003c\/em\u003e the RumbleSeat. Those are the \u003cstrong\u003e2024 adapters\u003c\/strong\u003e, and this mount will not fit them.\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003eNo\u003c\/strong\u003e — your RumbleSeat came with its own separate adapters, and the lower adapters only take the bassinet or an infant car seat. Those are the \u003cstrong\u003eoriginal adapters\u003c\/strong\u003e, and this is the mount you want.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you do not own a RumbleSeat\u003c\/strong\u003e, go by where the adapters came from. Bought in 2024 or later, or found in the box with a RumbleSeat V2+ or V3 — the new ones. Bought before 2024 as a separate accessory for a bassinet or car seat — the original ones.\u003c\/p\u003e\n\u003cp\u003eFor what it is worth, UPPAbaby describes the 2024 adapters as having \u003cstrong\u003elarger hubs\u003c\/strong\u003e than the ones they replaced, and sells them as fitting the Bassinet, Aria, Mesa V2 and Mesa Max \u003cstrong\u003eand the RumbleSeat V2+ and V3\u003c\/strong\u003e. The original adapters were never sold as fitting any RumbleSeat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStill not sure? Send us a photo of your lower adapters before you order\u003c\/strong\u003e — \u003ca href=\"mailto:support@strollerhouse.com\"\u003eSupport@StrollerHouse.com\u003c\/a\u003e. We would far rather spend two minutes on an email than have you open a box containing a part that will not seat.\u003c\/p\u003e\n\u003ch2\u003eWhat it does\u003c\/h2\u003e\n\u003cp\u003eOur \u003cstrong\u003eYETI Hopper Flip Cooler Mount\u003c\/strong\u003e attaches your Hopper Flip 8 or Hopper Flip 12 to the lower position of your UPPAbaby Vista. The cooler gets its own spot on the stroller, and the storage basket underneath goes back to holding everything else — the diaper bag, the jackets, the snacks, the souvenirs, and whatever your kids hand you on the way out the door.\u003c\/p\u003e\n\u003cp\u003eDrinks for the park, breastmilk or formula that needs to stay cold, lunch for a full day out — all within easy reach, instead of buried at the bottom of the basket under everything you packed after it.\u003c\/p\u003e\n\u003cp\u003ePick your cooler size above. The Flip 8 and the Flip 12 each get their own mount, sized to that cooler.\u003c\/p\u003e\n\u003cp\u003eEvery order is a matched pair of mounts, printed in black.\u003c\/p\u003e\n\u003cp\u003eThe stroller and cooler are not included.\u003c\/p\u003e\n\u003ch2\u003eWhy Parents love it\u003c\/h2\u003e\n\u003cp\u003e• Gets the cooler out of the storage basket, freeing up that space for everything else\u003c\/p\u003e\n\u003cp\u003e• Rated to carry the cooler packed completely full — no rationing what you bring\u003c\/p\u003e\n\u003cp\u003e• Keeps cold drinks and snacks within easy reach — no digging under the seat\u003c\/p\u003e\n\u003cp\u003e• Sized specifically for the YETI Hopper Flip 8 or Hopper Flip 12\u003c\/p\u003e\n\u003cp\u003e• Rides low and inside the wheelbase, where hanging weight belongs\u003c\/p\u003e\n\u003cp\u003e• Keeps the upper stroller position available for your baby or toddler\u003c\/p\u003e\n\u003cp\u003e• Installs and removes without permanently modifying your stroller\u003c\/p\u003e\n\u003cp\u003e• Made to order and test-fitted on the actual stroller before it ships\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe original UPPAbaby Vista lower adapters — pre-2024.\u003c\/strong\u003e This is the part that decides whether it fits. See the test above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with the 2024 lower adapters\u003c\/strong\u003e (UPPAbaby part 0901-VLA-NA), the ones included with the RumbleSeat V2+ and RumbleSeat V3.\u003c\/p\u003e\n\u003cp\u003eOn a frame with the original lower adapters, this fits:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPPAbaby Vista V3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPPAbaby Vista V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPPAbaby Vista (2015–2019)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVista frames from 2014 and earlier use a different mounting interface and are \u003cstrong\u003enot\u003c\/strong\u003e compatible at all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYETI Hopper Flip 8\u003c\/strong\u003e or \u003cstrong\u003eYETI Hopper Flip 12\u003c\/strong\u003e (choose your size)\u003c\/p\u003e\n\u003cp\u003eThe Hopper Flip 18 is not currently supported.\u003c\/p\u003e\n\u003cp\u003eEach mount is shaped to its cooler, so the size you order has to match the cooler you own. It is not compatible with other UPPAbaby frames, other YETI models, or other brands of cooler — a different bag won't just fit a little looser or tighter, it won't seat at all.\u003c\/p\u003e\n\u003cp\u003eUPPAbaby stroller, lower adapters and YETI cooler are sold separately and are \u003cstrong\u003enot included\u003c\/strong\u003e with this product.\u003c\/p\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eThe mount seats in the lower position of your Vista, and your Hopper Flip seats into it. Your cooler rides on the stroller where you can get to it, and the storage basket underneath stays free for the rest of your gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cooler always mounts low.\u003c\/strong\u003e Hanging weight is the single most common way a stroller tips, which is why every stroller manual warns against hanging bags from the handlebar. A loaded cooler is heavy, so this mount puts it inside the wheelbase, where the weight is carried rather than levered. There is no upper-position version of this mount and there will not be one.\u003c\/p\u003e\n\u003cp\u003eThe Vista's lower position holds one thing at a time, so it's the cooler mount or a lower-slot adapter down there, not both. Everything above is unaffected — the toddler seat, bassinet and infant car seat all mount as usual, and the seat still reclines fully.\u003c\/p\u003e\n\u003ch2\u003eRemove it before you fold the stroller\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe mount must come off before the stroller is folded.\u003c\/strong\u003e Folding with it installed can damage the mount, the cooler, or the frame itself. Take the cooler off first, then the mount, then fold.\u003c\/p\u003e\n\u003ch2\u003eWhat it's rated for\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA completely full cooler.\u003c\/strong\u003e Pack the Hopper Flip to capacity — ice, cans, bottles, whatever fits — and the mount is built to carry it. You don't need to weigh anything or hold back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it is not built for is a person's weight.\u003c\/strong\u003e Never let a child sit, stand, lean or climb on a mounted cooler, and never use it as a step or a seat. It is a cooler mount, not a perch. Nothing other than the cooler should be hung from it either.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my Vista?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt depends on your lower adapters, not on your frame. It fits the original pre-2024 lower adapters on a Vista V3, V2 or 2015–2019 frame. It does not fit the 2024 lower adapters that come with a RumbleSeat V2+ or V3. Vistas from 2014 and earlier are not compatible at all. The test above will tell you which adapters you have in about ten seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI have the 2024 adapters. What now?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not order this one — it will not seat. We have the 2024 adapter on order and are building a version for it. It will go up once it has been test-fitted on the real part, the same as everything else here. \u003ca href=\"\/#sh-fit-finder\"\u003eTell the Fit Finder\u003c\/a\u003e and we will email you the day it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the stroller model year not settle it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the adapters are a separate part with their own history. UPPAbaby redesigned them in 2024 so one set could carry the bassinet, the car seat and the new RumbleSeat. A V2 owner who bought adapters last year has the new ones; a V3 owner using adapters carried over from an older setup may have the originals. The adapter is the thing to look at.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it hold a completely full cooler?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — pack it to capacity. The mount is built to carry a fully loaded Hopper Flip, so you don't have to think about how much you're bringing. What it is \u003cem\u003enot\u003c\/em\u003e built for is a person's weight: never let a child sit, stand or climb on a mounted cooler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy not just put the cooler in the storage basket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can — but a Hopper Flip takes up a big chunk of it, and it usually ends up buried under everything else. This mount gives the cooler its own spot, so the basket has room for the rest of your day and the cold stuff stays within reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich size do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe one that matches your cooler. The Hopper Flip 8 mount fits the Hopper Flip 8, and the Hopper Flip 12 mount fits the Hopper Flip 12.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount the cooler up top?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The cooler always mounts in the lower position, for weight distribution. There is no upper version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the seat still fully recline with the cooler mounted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — with either the Hopper Flip 8 or the Hopper Flip 12.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this and a lower-slot adapter at the same time?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Both use the same lower mounting position, and the Vista only has one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan my child still ride up top?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The upper position is unaffected — toddler seat, bassinet or infant car seat all mount as usual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many pieces come in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo. The mount ships as a matched pair, printed in black — the only color we print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cooler come with the mount?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This listing is for the mount only. The stroller and YETI cooler must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to modify my stroller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The mount uses the stroller's existing lower position and does not require permanent modification of the stroller or cooler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made by YETI or UPPAbaby?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is an independently designed aftermarket accessory made by Stroller House. We are not affiliated with, sponsored by, authorized by, or endorsed by YETI or UPPAbaby.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHas this been tested?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — the actual printed part, loaded on the bench, before it was ever listed. Nothing goes on sale here until it has been tested rather than modeled, and every part is test-fitted on the real stroller before it ships. Where we publish a weight figure, that figure is never more than half of what the part was tested to carry — a safety factor of at least two. We don't publish the bigger number, because margin you advertise is margin people spend.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the mount made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePETG, 3D printed to order in our own shop in Texas, then test-fitted on the actual stroller before it ships. Printing to order is how we can make parts for frames nobody else covers — there is no tooling to pay for and no minimum run, so a part exists as soon as the design is proven rather than once a thousand of them have been sold.\u003c\/p\u003e\n\u003ch2\u003eMade to order, and fitted before it ships\u003c\/h2\u003e\n\u003cp\u003eEach mount is printed after you order it, then \u003cstrong\u003etest-fitted on the actual stroller\u003c\/strong\u003e — we own the frame this is designed for — and inspected before it goes in the box. You'll get tracking as soon as it ships.\u003c\/p\u003e\n\u003ch2\u003eIf something is wrong\u003c\/h2\u003e\n\u003cp\u003eIf a mount arrives damaged, doesn't seat on your frame, or isn't what you ordered, send a photo within 30 days and we'll replace it at our cost — you won't need to ship the original back. \u003cstrong\u003eThat includes ordering this one and finding you have the 2024 adapters.\u003c\/strong\u003e Full details in \u003ca href=\"\/policies\/refund-policy\"\u003ereturns\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBefore you use it\u003c\/h2\u003e\n\u003cp\u003eThis is an aftermarket accessory made by Stroller House, not an UPPAbaby or YETI part, and fitting it may affect your stroller's warranty. \u003cstrong\u003eIt is not a child restraint, is not certified to any child restraint standard, and nothing a child rides in or on may ever be attached to it.\u003c\/strong\u003e The mount carries a fully loaded cooler, but it is \u003cstrong\u003enever\u003c\/strong\u003e rated for a person's weight — no child may sit, stand, lean or climb on a mounted cooler, and nothing other than the cooler should be hung from it. \u003cstrong\u003eRemove the mount before you fold the stroller.\u003c\/strong\u003e Check that it is seated and the cooler is secure before each use, and stop using it at the first sign of cracking, whitening, deformation or movement. Keep printed parts out of hot parked cars. Always follow the stroller manufacturer's instructions and weight limits. See \u003ca href=\"\/pages\/installation-and-safety\"\u003einstallation and safety\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eYETI® and Hopper® are trademarks of YETI Coolers, LLC. UPPAbaby®, Vista® and RumbleSeat® are trademarks of their respective owner. Stroller House is not affiliated with, endorsed by, sponsored by, or connected to YETI, UPPAbaby, or their parent companies. Brand and model names appear here only to identify the products this accessory is designed to fit.\u003c\/em\u003e\u003c\/p\u003e","brand":"Stroller House","offers":[{"title":"Hopper Flip 8","offer_id":42760309637202,"sku":"SH-UPP-VIS-YETI8-01","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Hopper Flip 12","offer_id":42760309669970,"sku":"SH-UPP-VIS-YETI12-01","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/2706\/7730\/files\/vista-yeti-hopper-cooler-mount-main.png?v=1791118245"},{"product_id":"balance-bike-scooter-holder-uppababy-vista","title":"Balance Bike \u0026 Scooter Holder for UPPAbaby Vista","description":"\u003cp\u003eThey ride the whole way to the park. They do not ride the whole way home.\u003c\/p\u003e\n\u003cp\u003eThat is exactly what this holder is designed to fix.\u003c\/p\u003e\n\u003cp\u003eOur \u003cstrong\u003eBalance Bike \u0026amp; Scooter Holder\u003c\/strong\u003e clips onto the upper side frame tube of your UPPAbaby Vista and gives the bike its own place to ride. Two cradles sit along the tube with their openings facing up, so the bike drops straight in and lifts straight out — no straps to thread, no bungee to fight, no bike over your shoulder for the last mile.\u003c\/p\u003e\n\u003cp\u003eIt rides low and outboard of the frame, well inside the footprint of the stroller, because hanging weight high on a stroller is the main way one tips. That is also why it does not go anywhere near the handlebar.\u003c\/p\u003e\n\u003cp\u003eEvery order is a matched pair of holders, printed in black.\u003c\/p\u003e\n\u003cp\u003eThe stroller, bike and scooter are not included.\u003c\/p\u003e\n\u003ch2\u003eWhy parents love it\u003c\/h2\u003e\n\u003cp\u003e• The bike comes home on the stroller instead of under your arm\u003c\/p\u003e\n\u003cp\u003e• Drops in and lifts out in one motion — nothing to unclip or unthread\u003c\/p\u003e\n\u003cp\u003e• Mounts low and inside the wheelbase, where weight belongs on a stroller\u003c\/p\u003e\n\u003cp\u003e• Takes a balance bike or a kick scooter\u003c\/p\u003e\n\u003cp\u003e• Rated to carry 50 lb — many times what any balance bike weighs\u003c\/p\u003e\n\u003cp\u003e• Leaves the storage basket free for everything else\u003c\/p\u003e\n\u003cp\u003e• A rubber grip strip in each clip holds the pair in place along the tube\u003c\/p\u003e\n\u003cp\u003e• Installs and removes without permanently modifying your stroller\u003c\/p\u003e\n\u003cp\u003e• Made to order and test-fitted on the actual stroller before it ships\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eUPPAbaby Vista.\u003c\/strong\u003e Vista V1 (2015–2019), V2 and V3 — every Vista from 2015 onward — share the mounting interface. Vista frames from 2014 and earlier use a different interface and are not compatible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEither side.\u003c\/strong\u003e Both holders go on the same tube — the upper side frame tube — and you choose which side of the stroller that is. Left or right, the pair fits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fits in the cradle.\u003c\/strong\u003e The cradle is \u003cstrong\u003e46 mm (1.8 in)\u003c\/strong\u003e across on the inside and about \u003cstrong\u003e55 mm (2.2 in)\u003c\/strong\u003e deep. Measure whatever will rest in it — the top tube of a balance bike, or the steering column of a kick scooter — at its widest point. Anything up to 46 mm drops straight in. That is the number to check, not the brand on the bike.\u003c\/p\u003e\n\u003cp\u003ePlease verify your stroller model before ordering.\u003c\/p\u003e\n\u003cp\u003eStroller, bike and scooter are sold separately and are \u003cstrong\u003enot included\u003c\/strong\u003e with this product.\u003c\/p\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eEach holder hooks over the top of the frame tube and swings down until the bottom clicks. No tools, nothing to tighten, nothing to over-tighten.\u003c\/p\u003e\n\u003cp\u003eThe clip is \u003cstrong\u003eload-closing\u003c\/strong\u003e. The weight of the bike rotates each holder \u003cem\u003einto\u003c\/em\u003e its hook rather than off it, so the load pulls the clip tighter onto the tube the more you put in it. A push-on clamp does the opposite — the bike's leverage walks it off the corner. We know, because that is what an earlier design did on the bench, and it is the reason this one is shaped the way it is.\u003c\/p\u003e\n\u003cp\u003eA rubber grip strip sits in a pocket on the frame side of each clip, so the pair does not creep along the tube.\u003c\/p\u003e\n\u003cp\u003eThe bike rests in the cradles with its own weight holding it down. Lift it out the same way it went in.\u003c\/p\u003e\n\u003ch2\u003eRemove it before you fold the stroller\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe holders must come off before the stroller is folded.\u003c\/strong\u003e Folding with them installed can damage the holders, the bike, or the frame itself. Take the bike out first, then the holders, then fold.\u003c\/p\u003e\n\u003cp\u003eWith the pair fitted and the bike loaded, the stroller rolls, steers and brakes normally, and the bike sits clear of the rear wheel.\u003c\/p\u003e\n\u003ch2\u003eWhat it's rated for\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRated to carry 50 lb.\u003c\/strong\u003e That is many times what a balance bike or a kick scooter weighs, which is the point — the rating is not the thing you should have to think about on a walk to the park. The figure we publish is never more than half of what the part was tested to carry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt is not a child restraint and is not certified to any child restraint standard. It must never be used to support, restrain or carry a child. It carries the bike or scooter only when no one is on it — never put a child on a bike or scooter while it is in the holder, and never let a child sit, stand, lean or climb on the holder or on what it is carrying. It is not a seat, a step or a perch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eMore from Stroller House\u003c\/h2\u003e\n\u003cp\u003e• \u003ca href=\"\/pages\/fit-guide\"\u003eStroller adapter fit guide\u003c\/a\u003e — what fits what, across brands, in one place.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight will it hold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pair is rated to carry 50 lb, which is many times what a balance bike or kick scooter weighs. What it is \u003cem\u003enot\u003c\/em\u003e built for is a person's weight: no child may sit, stand, lean or climb on the holders or on a mounted bike, and no one may ride a bike or scooter while it is in them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bike need to be strapped in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It sits in the cradles under its own weight. That is the point — one motion in, one motion out, while you are holding everything else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side does it mount on?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEither side. Both holders go on the same upper side frame tube, and the choice is yours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far apart do the two holders sit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThat is yours to set. Space them so your bike hangs level, then leave them there — the grip strip keeps them put.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they slide down the frame tube?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. A rubber grip strip sits in a pocket on the frame side of each clip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big are they?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach holder is about 101 × 66 × 30 mm (4 × 2.6 × 1.2 in) and weighs about 2 oz. They were deliberately shortened from an earlier, bulkier version without giving up any of the rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many pieces come in the box?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo. The holder ships as a matched pair, printed in black — the only color we print. Both pieces go on the same frame tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the bike come with the holder?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This listing is for the pair of holders only. The stroller, bike and scooter must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHas this been tested?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes — the actual printed part, loaded on the bench, before it was ever listed. Nothing goes on sale here until it has been tested rather than modeled, and every part is test-fitted on the real stroller before it ships. Where we publish a weight figure, that figure is never more than half of what the part was tested to carry — a safety factor of at least two. We don't publish the bigger number, because margin you advertise is margin people spend.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it made from?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePETG — tougher and far more heat-tolerant than the PLA most printed parts use. Each holder is printed with six solid wall loops, because on a part shaped like this the strength lives in the skin rather than the infill. Black is the only color we print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I have to modify my stroller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The holders clip onto the existing frame tube and do not require permanent modification of the stroller or the bike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this made by UPPAbaby?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is an independently designed aftermarket accessory made by Stroller House. We are not affiliated with, sponsored by, authorized by, or endorsed by UPPAbaby.\u003c\/p\u003e\n\u003ch2\u003eMade to order, and fitted before it ships\u003c\/h2\u003e\n\u003cp\u003eEach pair is printed after you order it, then \u003cstrong\u003etest-fitted on the actual stroller\u003c\/strong\u003e — we own the Vista these were designed on, and the photos on this listing are that stroller — and inspected before it goes in the box. You'll get tracking as soon as it ships.\u003c\/p\u003e\n\u003ch2\u003eIf something is wrong\u003c\/h2\u003e\n\u003cp\u003eIf a holder arrives damaged, doesn't seat on your frame, or isn't what you ordered, send a photo within 30 days and we'll replace it at our cost — you won't need to ship the original back. Full details in \u003ca href=\"\/policies\/refund-policy\"\u003ereturns\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBefore you use it\u003c\/h2\u003e\n\u003cp\u003eThis is an aftermarket accessory made by Stroller House, not an UPPAbaby part, and fitting it may affect your stroller's warranty. \u003cstrong\u003eIt is not a child restraint and is not certified to any child restraint standard. It must never be used to support, restrain or carry a child. It carries the bike or scooter only when no one is on it — never put a child on a bike or scooter while it is in the holder, and never let a child sit, stand, lean or climb on the holder or on what it is carrying. It is not a seat, a step or a perch.\u003c\/strong\u003e \u003cstrong\u003eRemove the holders before you fold the stroller.\u003c\/strong\u003e Check that both are seated and the bike is settled in the cradles before each use, and stop using them at the first sign of cracking, whitening, deformation or movement. Keep printed parts out of hot parked cars. Always follow the stroller manufacturer's instructions and weight limits. See \u003ca href=\"\/pages\/installation-and-safety\"\u003einstallation and safety\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUPPAbaby® and Vista® are trademarks of UPPAbaby. Stroller House is not affiliated with, endorsed by, sponsored by, or connected to UPPAbaby or its parent companies. Brand and model names appear here only to identify the products this accessory is designed to fit.\u003c\/em\u003e\u003c\/p\u003e","brand":"Stroller House","offers":[{"title":"Default Title","offer_id":42770610552914,"sku":"SH-UPP-VST-BIKE-01","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/2706\/7730\/files\/vista-balance-bike-scooter-holder-main.png?v=1791118252"}],"url":"https:\/\/www.strollerhouse.com\/collections\/uppababy-vista.oembed","provider":"Stroller House","version":"1.0","type":"link"}